• Oszilloskope

    Infiniium S-Oszilloskop plus Zugabe

    Wissenswertes Oszilloskope
  • |
  • Netzgeräte
    Programmierbare System-Stromversorgung in 2 HEWissenswertes zu Labor-Stromversorgungen
  • |
  • Labor-Messgeräte
    Spektrumanalysator N9010B EXA
    Applikationschriften Messtechnik
  • |
  • Multimeter
    Multimeter HMC8012
    Wissenswertes Multimeter
  • |
  • Thermografie
    Stationäre WFLIR C3 Kompakt-Wärmebildkamera gratisBK
    Wissenswertes Thermografie
  • |
  • Prüfgeräte

    Prüfgeräte-Set für Energiesysteme
    Wissenswertes Prüfgeräte VDE

  • |
  • Tools
    Lötstationenset WT1012
    Wissenswertes Löten und Absaugen
  • |
  • Seminare
    Kostenlose HOTSPOTS-Seminare von Keysight
    Seminare von dataTec
  • |
  • Info
Keysight - N2142A - Tastkopf, Passiv, 2er Pack  1/10:1, 6/75 MHz, 150/300V, 1,2m, BNC

Keysight N2142A Tastkopf, Passiv, 2er Pack 1/10:1, 6/75 MHz, 150/300V, 1,2m, BNC

Keysight N 2142A | Tastkopf, Passiv, 2er Pack 1/10:1, 6/75 MHz, 150/300V, 1,2m, BNC. The Keysight N2142A is an extremely low-cost passive probe that provides a switchable 10:1...
Weitere Produktdetails ...
Tastkopf, Passiv, 2er Pack 1/10:1, 6/75 MHz, 150/300V, 1,2m, BNC

Keysight N2142A | Tastkopf, Passiv, 2er Pack 1/10:1, 6/75 MHz, 150/300V, 1,2m, BNC.

The Keysight N2142A is an extremely low-cost passive probe that provides a switchable 10:1/1:1 attenuation and up to 75 MHz bandwidth. It features a high input resistance of 10 MΩ (switchable to 1 MΩ) to address a wide range of measurement needs with low probe loading. The probe can be adjusted for both low-frequency compensation and high-frequency compensation. For the best measurements, you should compensate your probe to match its characteristics to the oscilloscope. This probe is compatible with Keysight InfiniiVision Series oscilloscopes with 1 MΩ input.

Key Features & Specifications:

  • Bandwidth DC to 75 MHz
  • Cable length 1.3 m
  • Switchable 1:1 or 10:1 attenuation ratio
  • Input resistance of 1 MΩ (1:1) or 10 MΩ (10:1)
  • Maximum input of 150 Vrms CAT II (1:1) or 300 Vrms CAT II (10:1)
  • 100 pf (1:1) of 15 pf (10:1) input capacitance
  • Compatible with Keysight InfiniiVision Series oscilloscopes with 1 MΩ input
Bestellbar.
EUR 51,79 + MwSt   
Menge:
Menge:
   

Keysight N2142A | Tastkopf, Passiv, 2er Pack 1/10:1, 6/75 MHz, 150/300V, 1,2m, BNC.

The Keysight N2142A is an extremely low-cost passive probe that provides a switchable 10:1/1:1 attenuation and up to 75 MHz bandwidth. It features a high input resistance of 10 MΩ (switchable to 1 MΩ) to address a wide range of measurement needs with low probe loading. The probe can be adjusted for both low-frequency compensation and high-frequency compensation. For the best measurements, you should compensate your probe to match its characteristics to the oscilloscope. This probe is compatible with Keysight InfiniiVision Series oscilloscopes with 1 MΩ input.

Key Features & Specifications:

  • Bandwidth DC to 75 MHz
  • Cable length 1.3 m
  • Switchable 1:1 or 10:1 attenuation ratio
  • Input resistance of 1 MΩ (1:1) or 10 MΩ (10:1)
  • Maximum input of 150 Vrms CAT II (1:1) or 300 Vrms CAT II (10:1)
  • 100 pf (1:1) of 15 pf (10:1) input capacitance
  • Compatible with Keysight InfiniiVision Series oscilloscopes with 1 MΩ input

Nach oben gehen.