• Oszilloskope

    Kostenlose und unverbindliche Beratung

    Wissenswertes Oszilloskope
  • |
  • Netzgeräte
    DC-Netzgeraete+Senke-RP7900-KeysightWissenswertes zu Labor-Stromversorgungen
  • |
  • Labor-Messgeräte
    USB-Netzwerk-Analysator-PICO
    Applikationschriften Messtechnik
  • |
  • Multimeter
    Milliohm-Meter-16502-Chroma
    Wissenswertes Multimeter
  • |
  • Thermografie
    Angebote der Wärmebildtechnik
    Wissenswertes Thermografie
  • |
  • Prüfgeräte

    Prüfgeräte-Set zum Sonderpreis
    Wissenswertes Prüfgeräte VDE

  • |
  • Tools
    Schadstoffabsaugung am Arbeitsplatz
    Wissenswertes Löten und Absaugen
  • |
  • Seminare
    Buchen Sie jetzt Ihren Seminarplatz!
    Seminare von dataTec
  • |
  • Info
Pico - TA326 - Stromzange, 1 phasig, AC 30/300/3000A,  BNC Anschluss, Batteriebetrieb, ø=19,4 cm

Pico TA326 Stromzange, 1 phasig, AC 30/300/3000A, BNC Anschluss, Batteriebetrieb, ø=19,4 cm

Pico TA326 | Stromzange, 1 phasig, AC 30/300/3000A mit BNC Anschluss für Oszilloskope, Batteriebetrieb. The TA326 is a switched-range 30/300/3000 A AC RMS probe with 10 Hz to 2...
Weitere Produktdetails ...
Stromzange, 1 phasig, AC 30/300/3000A, BNC Anschluss, Batteriebetrieb, ø=19,4 cm

Pico TA326 | Stromzange, 1 phasig, AC 30/300/3000A mit BNC Anschluss für Oszilloskope, Batteriebetrieb.

The TA326 is a switched-range 30/300/3000 A AC RMS probe with 10 Hz to 20 kHz bandwidth, rated to 1000 V CAT III on uninsulated conductors. Typical battery life is 2000 hours.

This probe use is based on Rogowski coil technology which do not suffer from saturation and therefore have higher bandwidths much more suitable for the higher bandwidth needed for harmonic analysis. Also CTs have inherent phase issues the higher the frequencies being measured. 

The probe is NOT powered or sensed by PicoScope 4444.
You will need one TA271 D9-BNC adaptor in order to use this probe with the PicoScope 4444.

Key Features & Specifications:

  • Flexible coil allows access to hard to reach cables and bus bars.
  • High bandwidth, low noise, low phase difference/Hz
  • Although not powered from the scope, the battery lasts 2000 hours.

Applications:

  • Single phase current and power quality monitoring and analysis up to 1000 V CAT III environments.
Bestellbar.
EUR 309,00 + MwSt   
Menge:
Menge:
   

Pico TA326 | Stromzange, 1 phasig, AC 30/300/3000A mit BNC Anschluss für Oszilloskope, Batteriebetrieb.

The TA326 is a switched-range 30/300/3000 A AC RMS probe with 10 Hz to 20 kHz bandwidth, rated to 1000 V CAT III on uninsulated conductors. Typical battery life is 2000 hours.

This probe use is based on Rogowski coil technology which do not suffer from saturation and therefore have higher bandwidths much more suitable for the higher bandwidth needed for harmonic analysis. Also CTs have inherent phase issues the higher the frequencies being measured. 

The probe is NOT powered or sensed by PicoScope 4444.
You will need one TA271 D9-BNC adaptor in order to use this probe with the PicoScope 4444.

Key Features & Specifications:

  • Flexible coil allows access to hard to reach cables and bus bars.
  • High bandwidth, low noise, low phase difference/Hz
  • Although not powered from the scope, the battery lasts 2000 hours.

Applications:

  • Single phase current and power quality monitoring and analysis up to 1000 V CAT III environments.

nach oben