• Oszilloskope
    Die neuen PicoScope 5000D USB-Oszilloskope
    Wissenswertes Oszilloskope
  • |
  • Netzgeräte
    Bidirektionale Hochleistungs-Stromversorgungen Wissenswertes zu Labor-Stromversorgungen
  • |
  • Labor-Messgeräte
    http://www.datatec.de/P937xA.html
    Applikationschriften Messtechnik
  • |
  • Multimeter
    TRMS-Multimeter & RCD-Tester Jupiter
    Wissenswertes Multimeter
  • |
  • Thermografie
    Wärmebildkameras U585xA mit Fine Resolution
    Wissenswertes Thermografie
  • |
  • Prüfgeräte

    Gerätetester FULLTEST 3 nach VDE 0113 / EN 60204-1
    Wissenswertes Prüfgeräte VDE

  • |
  • Tools
    Flächen- und Schadstoffabsaugungen der Zero Smog-Serie
    Wissenswertes Löten und Absaugen
  • |
  • Seminare
    Zu den nächsten Terminen
    Seminare von dataTec
  • |
  • Info
GW Instek - PEL-300 - Elektronische Last 60V/60A, 300W
GW Instek - PEL-300 - Elektronische Last 60V/60A, 300W

GW Instek PEL-300 Elektronische Last 60V/60A, 300W

GW Instek PEL300 | D.C. Electronic Load 60 V DC, 60 A, 300 W. PEL-300 is a single channel, 300W, programmable DC electronic load. OVP, OCP, and OPP protect PEL-300 from unexpected load conditions. The PEL-300 DC e...
Weitere Produktdetails ...
Elektronische Last 60V/60A, 300W

GW Instek PEL300 | D.C. Electronic Load 60 V DC, 60 A, 300 W.

PEL-300 is a single channel, 300W, programmable DC electronic load. OVP, OCP, and OPP protect PEL-300 from unexpected load conditions. The PEL-300 DC electronic load complies with major safety standards such as UL, CSA, and IEC to ensure safety. A high resolution of 20mV, 0.2mA and 0.33m (CV, CC, CR mode) ensures accurate load measurements. Sequence programming is simplified with save and recall options as well as extensive timer settings. It has self-test and software calibration features to reduce maintenance overhead. PEL-300 is suitable for laboratory and production line applications, where safety and reliability are the top priorities.

Key Features & Specifications:

  • Easy Operation with UP/DOWN Key
  • Operating Current 6mA ~ 60A
  • Operating Power 1 ~ 300W
  • Operating Voltage DC 3 ~ 60V
  • Operating Resistance 50mΩ ~ 1 kΩ
  • High Resolution: 20mV, 0.2mA, 0.33mΩ
  • Over Voltage, Over Current, Over Power Protection
  • 100 Sets Memory
  • Operation Mode: CC Mode (Constant current), CV Mode (constant voltage), CR Mode (constant resistance)
  • Transient Generator Frequency: Range : 1Hz ~ 1kHz; Duty Range : 10% ~ 90%
  • Self-Test and Software Calibration
  • Power Source: AC100V/120V/220V/240V 10%, 50/60Hz
  • Dimensions: 255(W) x 145(H) x 346(D) mm, Approx. 9kg
Sofort verfügbar
EUR 1.098,00 + MwSt   
Menge:
Menge:
   

GW Instek PEL300 | D.C. Electronic Load 60 V DC, 60 A, 300 W.

PEL-300 is a single channel, 300W, programmable DC electronic load. OVP, OCP, and OPP protect PEL-300 from unexpected load conditions. The PEL-300 DC electronic load complies with major safety standards such as UL, CSA, and IEC to ensure safety. A high resolution of 20mV, 0.2mA and 0.33m (CV, CC, CR mode) ensures accurate load measurements. Sequence programming is simplified with save and recall options as well as extensive timer settings. It has self-test and software calibration features to reduce maintenance overhead. PEL-300 is suitable for laboratory and production line applications, where safety and reliability are the top priorities.

Key Features & Specifications:

  • Easy Operation with UP/DOWN Key
  • Operating Current 6mA ~ 60A
  • Operating Power 1 ~ 300W
  • Operating Voltage DC 3 ~ 60V
  • Operating Resistance 50mΩ ~ 1 kΩ
  • High Resolution: 20mV, 0.2mA, 0.33mΩ
  • Over Voltage, Over Current, Over Power Protection
  • 100 Sets Memory
  • Operation Mode: CC Mode (Constant current), CV Mode (constant voltage), CR Mode (constant resistance)
  • Transient Generator Frequency: Range : 1Hz ~ 1kHz; Duty Range : 10% ~ 90%
  • Self-Test and Software Calibration
  • Power Source: AC100V/120V/220V/240V 10%, 50/60Hz
  • Dimensions: 255(W) x 145(H) x 346(D) mm, Approx. 9kg

▲ Nach oben