• Oszilloskope

    Infiniium-Oszilloskope mit Gratis Zugabe

    Wissenswertes Oszilloskope
  • |
  • Netzgeräte
    Elektronische Lasten ElektroautomatikWissenswertes zu Labor-Stromversorgungen
  • |
  • Labor-Messgeräte
    Große Auswahl von Messtechnikzubehör
    Applikationschriften Messtechnik
  • |
  • Multimeter
    Gratis Multimeter bei Neukauf Messtechnik Big5
    Wissenswertes Multimeter
  • |
  • Thermografie
    E4 Wärmebildkamera

    Wissenswertes Thermografie
  • |
  • Prüfgeräte

    SECUTEST Pro inkl. kostenloser Zugaben
    Wissenswertes Prüfgeräte VDE

  • |
  • Tools
    Lötzinn
    Wissenswertes Löten und Absaugen
  • |
  • Seminare
    Buchen Sie jetzt Ihren Seminarplatz!
    Seminare von dataTec
  • |
  • Info
Keysight - N7010A - Active Termination Adapter, 30 GHz für Infiniium Q-, Z- und V-Serie Oszilloskope
Keysight - N7010A - Active Termination Adapter, 30 GHz für Infiniium Q-, Z- und V-Serie Oszilloskope

Keysight N7010A Active Termination Adapter, 30 GHz für Infiniium Q-, Z- und V-Serie Oszilloskope

Keysight N7010A | 30 GHz Active Termination Adapter for Infiniium Oscilloscopes. The Keysight N7010A active termination adapter is a 30 GHz single-ended adapter featuring a use...
Weitere Produktdetails unten ...
Active Termination Adapter, 30 GHz für Infiniium Q-, Z- und V-Serie Oszilloskope

Keysight N7010A | 30 GHz Active Termination Adapter for Infiniium Oscilloscopes.

The Keysight N7010A active termination adapter is a 30 GHz single-ended adapter featuring a user-adjustable common termination voltage (VTERM) and extremely low noise performance.

The adapter was designed to address applications such as HDMI 2.0, DisplayPort and MIPI M-PHY Gear 3/4. The oscilloscope can internally control the termination voltage to keep it between -4.0 V to +4.0 V. Utilizing low attenuation ratio setting (1.16:1), the adapter enables extremely lower noise floor.

Previously solved by using expensive probe solution in single-ended mode, now you get the performance and price point you want. This adapter is compatible with Infiniium 90000 Q-, Z-Series and V-Series oscilloscopes installed with software version 5.30 or higher and Infiniium 90000 X-Series with software version 5.50.0030 or higher.

Key Features & Specifications:

  • 30 GHz single-ended active termination adapter supporting 2.92 mm/3.5 mm/SMA cable input
  • Low attenuation setting (1.16:1) for high SNR, low noise measurements
  • Ability to terminate signal to a 50 Ω non-ground voltage (VTERM)
  • Compatible with Infiniium 90000Q, Z-Series, or V-Series oscilloscopes
Bestellbar.
EUR 4.657,00 + MwSt   
Menge:
Menge:
   

Keysight N7010A | 30 GHz Active Termination Adapter for Infiniium Oscilloscopes.

The Keysight N7010A active termination adapter is a 30 GHz single-ended adapter featuring a user-adjustable common termination voltage (VTERM) and extremely low noise performance.

The adapter was designed to address applications such as HDMI 2.0, DisplayPort and MIPI M-PHY Gear 3/4. The oscilloscope can internally control the termination voltage to keep it between -4.0 V to +4.0 V. Utilizing low attenuation ratio setting (1.16:1), the adapter enables extremely lower noise floor.

Previously solved by using expensive probe solution in single-ended mode, now you get the performance and price point you want. This adapter is compatible with Infiniium 90000 Q-, Z-Series and V-Series oscilloscopes installed with software version 5.30 or higher and Infiniium 90000 X-Series with software version 5.50.0030 or higher.

Key Features & Specifications:

  • 30 GHz single-ended active termination adapter supporting 2.92 mm/3.5 mm/SMA cable input
  • Low attenuation setting (1.16:1) for high SNR, low noise measurements
  • Ability to terminate signal to a 50 Ω non-ground voltage (VTERM)
  • Compatible with Infiniium 90000Q, Z-Series, or V-Series oscilloscopes

nach oben