• Oszilloskope
    Die neuen PicoScope 5000D USB-Oszilloskope
    Wissenswertes Oszilloskope
  • |
  • Netzgeräte
    Bidirektionale Hochleistungs-Stromversorgungen Wissenswertes zu Labor-Stromversorgungen
  • |
  • Labor-Messgeräte
    http://www.datatec.de/P937xA.html
    Applikationschriften Messtechnik
  • |
  • Multimeter
    TRMS-Multimeter & RCD-Tester Jupiter
    Wissenswertes Multimeter
  • |
  • Thermografie
    Wärmebildkameras U585xA mit Fine Resolution
    Wissenswertes Thermografie
  • |
  • Prüfgeräte

    Gerätetester FULLTEST 3 nach VDE 0113 / EN 60204-1
    Wissenswertes Prüfgeräte VDE

  • |
  • Tools
    Flächen- und Schadstoffabsaugungen der Zero Smog-Serie
    Wissenswertes Löten und Absaugen
  • |
  • Seminare
    Zu den nächsten Terminen
    Seminare von dataTec
  • |
  • Info
Keysight - N1265A - Ultra High Current Expander / Fixture

Keysight N1265A Ultra High Current Expander / Fixture

Keysight N1265A Ultra High Current Expander/Fixture. Test fixture which contains the current expander to enable 500 A or 1500 A (option N1265A-015) output and measurement, and contains the selector to switch the...
Weitere Produktdetails ...
Ultra High Current Expander / Fixture

Keysight N1265A Ultra High Current Expander/Fixture.

Test fixture which contains the current expander to enable 500 A or 1500 A (option N1265A-015) output and measurement, and contains the selector to switch the measurement resource connected to the DUT.

The selector is used to switch the measurement resource connected to the DUT. The measurement resource will be the UHCU, HVSMU/HVMCU, or HP/MPSMU. The selector output can be extended to your prober station by using the N1254A-524 ultra high current prober system cable.
The N1265A also provides the connection paths for UHVU, MFCMU via bias-tee, and HP/MP/HC/MC/DHCSMU.

Bestellbar
Preis auf Anfrage.
EUR 0
Menge:
   

Keysight N1265A Ultra High Current Expander/Fixture.

Test fixture which contains the current expander to enable 500 A or 1500 A (option N1265A-015) output and measurement, and contains the selector to switch the measurement resource connected to the DUT.

The selector is used to switch the measurement resource connected to the DUT. The measurement resource will be the UHCU, HVSMU/HVMCU, or HP/MPSMU. The selector output can be extended to your prober station by using the N1254A-524 ultra high current prober system cable.
The N1265A also provides the connection paths for UHVU, MFCMU via bias-tee, and HP/MP/HC/MC/DHCSMU.


▲ Nach oben