• Oszilloskope
    Die neuen PicoScope 5000D USB-Oszilloskope
    Wissenswertes Oszilloskope
  • |
  • Netzgeräte
    Bidirektionale Hochleistungs-Stromversorgungen Wissenswertes zu Labor-Stromversorgungen
  • |
  • Labor-Messgeräte
    http://www.datatec.de/P937xA.html
    Applikationschriften Messtechnik
  • |
  • Multimeter
    TRMS-Multimeter & RCD-Tester Jupiter
    Wissenswertes Multimeter
  • |
  • Thermografie
    Wärmebildkameras U585xA mit Fine Resolution
    Wissenswertes Thermografie
  • |
  • Prüfgeräte

    Gerätetester FULLTEST 3 nach VDE 0113 / EN 60204-1
    Wissenswertes Prüfgeräte VDE

  • |
  • Tools
    Flächen- und Schadstoffabsaugungen der Zero Smog-Serie
    Wissenswertes Löten und Absaugen
  • |
  • Seminare
    Zu den nächsten Terminen
    Seminare von dataTec
  • |
  • Info
Keysight - N2843A - Tastkopf, Passiv 10:1, 500 MHz, 300 V RMS, BNC, Read-Out

Keysight N2843A Tastkopf, Passiv 10:1, 500 MHz, 300 V RMS, BNC, Read-Out

Keysight N2843A | Passiver Tastkopf / Probe mit 500 MHz, Teiler 10:1, BNC Anschluss und Read-Out. The Keysight N2843A low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 ...
Weitere Produktdetails ...
Tastkopf, Passiv 10:1, 500 MHz, 300 V RMS, BNC, Read-Out Keysight N2843A | Passiver Tastkopf / Probe mit 500 MHz, Teiler 10:1, BNC Anschluss und Read-Out.

The Keysight N2843A low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 MΩ. The probe can be adjusted for low-frequency compensation and high-frequency compensation.

For the best measurements you should compensate your probe to match its characteristics to the oscilloscope.

Key Features & Specifications:

  • Bandwidth DC to 500 MHz
  • Cable length 1.2 m
  • Rise time 700 ps
  • Attenuation ratio 10:1
  • Input resistance 10 MΩ (when terminated into 1 MΩ)
  • Maximum input 300 V RMS (or >400Vpk) CAT I and CAT II
  • Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 MΩ input
Sofort verfügbar
EUR 173,00 + MwSt   
Menge:
Menge:
   
Keysight N2843A | Passiver Tastkopf / Probe mit 500 MHz, Teiler 10:1, BNC Anschluss und Read-Out.

The Keysight N2843A low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 MΩ. The probe can be adjusted for low-frequency compensation and high-frequency compensation.

For the best measurements you should compensate your probe to match its characteristics to the oscilloscope.

Key Features & Specifications:

  • Bandwidth DC to 500 MHz
  • Cable length 1.2 m
  • Rise time 700 ps
  • Attenuation ratio 10:1
  • Input resistance 10 MΩ (when terminated into 1 MΩ)
  • Maximum input 300 V RMS (or >400Vpk) CAT I and CAT II
  • Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 MΩ input

▲ Nach oben