• Oszilloskope

    Mixed-Domain-Oszilloskope

    Wissenswertes Oszilloskope
  • |
  • Netzgeräte
    Regenerative, bidirektionale NetzgeräteWissenswertes zu Labor-Stromversorgungen
  • |
  • Labor-Messgeräte
    Große Auswahl zur Spektrumanalyse
    Applikationschriften Messtechnik
  • |
  • Multimeter
    Stromzangen-Multimeter Aktionen
    Wissenswertes Multimeter
  • |
  • Thermografie
    Stationäre WBK
    Wissenswertes Thermografie
  • |
  • Prüfgeräte

    All-in-One Prüfgeräte
    Wissenswertes Prüfgeräte VDE

  • |
  • Tools
    Lötstationen Weller
    Wissenswertes Löten und Absaugen
  • |
  • Seminare
    Buchen Sie jetzt Ihren Seminarplatz!
    Seminare von dataTec
  • |
  • Info
Keysight - N2842A - Passive probe - 300 MHz 10:1, BNC, Read-Out

Keysight N2842A Passive probe - 300 MHz 10:1, BNC, Read-Out

Keysight N2842A | Passive probe 300 MHz 10:1, BNC, Read-Out for oscilloscopes. The Keysight N2842A low-cost passive probe provides a 10:1 attenuation and features a high input ...
Weitere Produktdetails ...
Passive probe - 300 MHz 10:1, BNC, Read-Out

Keysight N2842A | Passive probe 300 MHz 10:1, BNC, Read-Out for oscilloscopes.

The Keysight N2842A low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 MΩ. The probe can be adjusted for low-frequency compensation and high-frequency compensation.

For the best measurements you should compensate your probe to match its characteristics to the oscilloscope.

Key Features & Specifications:

  • Bandwidth DC to 300 MHz
  • Cable length 1.2 m
  • Rise time 1.16 ns
  • Attenuation ratio 10:1
  • Input resistance 10 MΩ (when terminated into 1 MΩ)
  • Maximum input 300 V RMS (or >400Vpk) CAT I and CAT II
  • Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 MΩ input
Bestellbar.
EUR 144,00 + MwSt   
Menge:
Menge:
   

Keysight N2842A | Passive probe 300 MHz 10:1, BNC, Read-Out for oscilloscopes.

The Keysight N2842A low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 MΩ. The probe can be adjusted for low-frequency compensation and high-frequency compensation.

For the best measurements you should compensate your probe to match its characteristics to the oscilloscope.

Key Features & Specifications:

  • Bandwidth DC to 300 MHz
  • Cable length 1.2 m
  • Rise time 1.16 ns
  • Attenuation ratio 10:1
  • Input resistance 10 MΩ (when terminated into 1 MΩ)
  • Maximum input 300 V RMS (or >400Vpk) CAT I and CAT II
  • Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 MΩ input

Nach oben gehen.